氧气体积分数对油气爆炸特性的影响

作为燃烧和爆炸三要素之一,氧气体积分数的控制对于爆炸事故的防治具有重要意义。实验研究了氧气体积分数对汽油蒸气-空气混合物（简称油气）爆炸极限和爆炸压力的影响。结果表明：随着氧气体积分数的降低,油气爆炸下限呈一阶指数规律缓慢增大,油气爆炸上限呈线性规律迅速减小;爆炸极限范围由0.92%~3.76%缩小为1点,该爆炸极限临界点为1.22%,对应的临界氧气体积分数为11.4%;油气的最大爆炸压力和最大压力上升速率随着氧气体积分数的降低而减小,油气体积分数越大,氧气体积分数影响越显著。     

多态的大功率可控硅开关功率放大器的仿真

为了满足远距离海底探测对发射信号大功率的需求,选用了一种大功率可控硅开关功率放大器。在临界换流、自然换流和强迫换流3种工作状态下,分析了该功率放大器的工作原理,并建立了等效电路模型。运用Or CAD仿真了临界换流状态时的等效电路模型;在自然换流状态和强迫换流状态下,为获得功放电流值和负载电流值,对其等效电路模型分别建立了非线性数学模型,并通过Matlab和VC++采用四阶Runge-Kutta法对非线性数学模型进行求解。以上方法能够求得该功率放大器电路在任意时刻、任意点处的电流电压值,能较客观、真实地反映电路的工作状况,对工程应用具有一定的参考价值。     

舰艇滑油系统插装式减压阀的设计

介绍了为某型舰艇滑油系统而设计的控制压力低、流通能力大和稳定性好的插装式减压阀;建立了插装式减压阀的数学模型,通过Matlab仿真分析了插装式减压阀的稳态特性,并与试验测试结果进行了比较,验证了设计的结果是准确的.     

热气溶胶灭火装置安全隐患探讨

针对目前市场上热气溶胶灭火装置＂爆炸＂及存在安全隐患,阐述了其发生原理,并提出了热气溶胶灭火装置应严格控制的一些安全性能指标和结构方式。     

基于升余弦滤波的基带预失真环路延迟补偿

传统的基带预失真环路延迟估计和补偿方法估计过程复杂,收敛速度慢,补偿信号存在混迭失真,影响预失真系统的性能。为此,提出了一种新的基带预失真器环路延迟估计和补偿方法,该方法采用黄金分割法完成环路延迟搜索,用升余弦滤波器完成环路延迟补偿。其环路延迟估计搜索速度快,准确度高,环路延迟补偿后信号失真小,应用该方法的基带预失真系统NMSE指标较传统方法优化17 dB。     

外卡压力传感器的卡持结构设计与分析

针对外卡压力传感器存在的测试信号重复性差、信噪比低、安装局限性大的问题,设计了一种新型卡持结构——人字形结构,并从理论上分析了该结构相对于＂匚＂形夹块和环形夹块的优势。实验数据表明：采用人字形卡持结构的外卡压力传感器具有测试可靠、信噪比高、通用性好的特点。     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Hazard evaluation of ignition sensitivity and explosion severity for three typical MH2 (M＝Mg,Ti, Zr) of energetic materials

MgH2, TiH2, and ZrH2 are three typical metal hydrides that have been gradually applied to composite explosives and propellants as additives in recent years. To evaluate ignition sensitivity and explosion severity, the Hartmann device and spherical pressure vessel were used to test ignition energy and ex-plosion pressure, respectively. The results showed that the ignition sensitivity of ZrH2, TiH2 and MgH2 gradually increased. When the concentration of MgH2 is 83.0 g/m3 in Hartmann device, the ignition energy attained a minimum of 10.0 mJ. The explosion pressure of MgH2 were 1.44 times and 1.76 times that of TiH2 and ZrH2, respectively, and the explosion pressure rising rate were 3.97 times and 9.96 times that of TiH2 and ZrH2, respectively, through the spherical pressure vessel. It indicated that the reaction reactivity and reaction rate of MgH2 were higher than that of TiH2 and ZrH2. In addition, to conduct in-depth theoretical analysis of ignition sensitivity and explosion severity, gas production and combus-tion heat per unit mass of ZrH2, TiH2 and MgH2 were tested by mercury manometer and oxygen bomb calorimetry. The experimental results revealed that MgH2 had a relatively high gas production per unit mass (5.15 mL/g), while TiH2 and ZrH2 both had a gas production of less than 2.0 mL/g. Their thermal stability gradually increased, leading to a gradual increase in ignition energy. Furthermore, compared with theoretical combustion heat, the combustion ratio of MgH2, TiH2 and ZrH2 was more than 96.0%, with combustion heat value of 29.96, 20.94 and 12.22 MJ/kg, respectively, which was consistent with the explosion pressure and explosion severity test results.     

发动机缸内压缩压力非接触式检测方法研究

发动机汽缸压缩压力是检测发动机机密封性的重要参数.发动机密封性降低,会造成发动机经济性、动力性下降及废气排放指标恶化,因此对各缸压缩压力的检测具有重要意义.现提出一种利用曲轴瞬时转速,进行不解体检测坦克发动机汽缸压缩压力的方法.通过实车测量获得缸压及转速的特征参数,利用灰色理论模型的方法建立了发动机转速脉动与汽缸压缩压力的数学关系.试验结果表明,利用这种方法进行缸内压缩压力测量是可行的.     

船用三层组合外套液压联轴器最优分层分析

液压联轴器外套采用多层筒组合式外套可提高液压联轴器的弹性极限承载能力.文中对液压联轴器不同材料双层组合式外套和同种材料3层组合式外套进行了分析,确定了双层和3层外套分层界面的最佳半径.结果表明,3层外套的弹性极限承载能力比单层外套的弹性极限承载能力提高了31.4%;3层外套的弹性极限承载能力比双层外套的弹性极限承载能力提高了7.4%.